바로가기 메뉴
컨텐츠바로가기
주메뉴바로가기
하단메뉴바로가기

M.Ware for Power Plants

Specialized CMMS/EAM solution for a power plants

Home > Solutions > CMMS/EAM Solution > M.Ware for Power Plants

M.Ware for Power Plants is a maintenance management solution for plant equipment using reliability-centered maintenance (RCM). Unlike general plant equipment, power plant equipment is complex and diverse. In most cases, the equipment operates under severe temperature and pressure working conditions. M.Ware for Power Plants helps create an optimized plant maintenance policy and raises productivity by providing various functions that fit the specific operational characteristics of every plant’s equipment.

    • Plant Maintenance
    • Operational Information
    • Equipment Inspections

  • RCM(Reliability Centered Maintenance)

    • Cost Vs. Risk Analysis
    • Maintenance Strategies

Key Functions

주요기능
Plant Maintenance Enables the optimized design and performance of maintenance work according to the specific characteristics of the individual piece of
equipment
  • High-temperature parts
  • Preventive maintenance and inspection
  • Red tag issuing (Safety)
  • Interfaces with a Plant Information System (PIS)
  • Project management (Overhaul)
  • Analysis of maintenance plans and performance
Plant Operation
Information		 Ensures that the power plant is stable by providing plant operators with timely information regarding equipment operation
  • Operational status
  • Notification of shutdown cause
  • Electricity generation information
  • Shutdown management and statistics
RCM Categorizes key equipment maintenance using failure data analysis and helps to improve the performance of plant equipment with optimized
maintenance strategies.
  • Failure mode,cause, symptoms analysis(FMEA)
  • Criticality evaluation by equipment
  • Appropriate task evaluation

Case

  • Joint implementation of M.Ware for Power Plants for KOSPO, KOSEP, WP     자세히 보기
  • Implementation of M.Ware for Power Plants for EWP   자세히 보기
  • Implementation of M.Ware for Power Plants for KOMIPO   자세히 보기
  • Implementation of M.Ware for Power Plants for EWP in Cebu, Philippine

R&D

  • Study of maintenance management strategies for increasing power plant reliability
  • Development of a maintenance system based on the operational condition of the power plant’s equipment (KEPRI)

Joint establishment of M.Ware for a power plant for KOSPO, KOSEP, WP

Joint establishment of M.Ware for a power plant for KOSPO, KOSEP, WP
Customer
Capacity (KOSPO) Capacity (KOSEP) Capacity (WP)
Seoincheon Combined Cycle 1,800MW Samsheonpo Thermal 3,245MW Seoincheon Combined Cycle 1,800MW
Yeongwol Combined Cycle 848MW Yeongheung Thermal 3,340MW Pyeongtaek Thermal & Combined Cycle 1,880MW
Youngnam Thermal 400MW Yeongdong Thermal 325MW Taean Thermal 4,002.32MW
Busan Combined Cycle 1,800MW Yeosu Thermal 528.6MW Gusan Combined Cycle 718.4MW
Hadong Thermal 4,000MW Bundang Combined Cycle 900MW Samryangjin Pumped Storage Power 400MW
Namjeju Thermal 240MW

Established M.Ware for power plant for KOMIPO

한국중부발전 발전설비 정비관리시스템 구축
Customer
Capacity Boryeong Thermal 5,358MW
Incheon Thermal 1,512MW
Seoul Thermal 387.5MW
Seocheon Thermal 400MW
Jeju Thermal 285MW

Established M.Ware for a power plant for EWP

한국동서발전 발전설비 정비관리시스템 구축
Customer
Capacity Dangjin Coal Fired 4,000MW
Ulsan Oil Fired & Combined Cycle 3,000MW
Honam Coal Fired 500MW
Donghae CFBC 400MW
Ilsan Combined Heat & Power 900MW

OPMS implementation for a power plant at Al-Qatrana, Jordan

요르단 알 카트라나 발전소 발전소통합관리시스템 구축
Customer
Power plant and capacity Gas turbine combined cycle power plants 373MW (12% of entire capacity of Jordan)

OPMS implementation for diesel power plant at Al-Manakher, Jordan

요르단 알 마나카 디젤 발전소 발전소통합관리시스템 구축
Customer
Power plant and capacity Diesel power plant 600MW (The largest diesel power plant)